round sling standard

In lifting and rigging operations, safety is a strict requirement.In the United States, the Occupational Safety and Health Administration (OSHA) has established clear regulations for sling use to protect workers and prevent accidents.Any business that uses slings for hoisting, lifting, or material handling must understand and follow these standards. 1. Overview of OSHA Sling Standards The main OSHA regulations for slings are found in: 29 CFR 1910.184 – General Industry 29 CFR 1926.251 – Construction These cover: Types of slings (synthetic web, synthetic round, wire rope, alloy steel chain, etc.) Design and manufacturing requirements Inspection and removal from service Safe operating practices Identification and labeling requirements The purpose is to ensure slings are used within their rated capacity, remain in good condition, and are handled by trained personnel. 2. Identification and Labeling Each sling must have a permanent tag showing: Manufacturer’s name or trademark Rated load for each hitch type (vertical, choker, basket) Material type Length and width (for synthetic slings) Any warnings or limitations If the tag is missing or unreadable, the sling must be removed from service until proper identification is restored. 3. Inspection Requirements Slings must be inspected regularly for wear, damage, or defects.For synthetic web and round slings, check for: Cuts, fraying, or broken stitching Burns or chemical damage Knots or severe abrasion UV degradation Inspection frequency: Visual check before each day’s use Periodic inspection based on service conditions Any sling showing signs of damage must be removed from service immediately. 4. Safe Use Practices To comply with OSHA requirements: Never exceed the Working Load Limit (WLL) Avoid shock loading Use corner protectors or padding at sharp edges Store slings in a dry, clean place, away from sunlight and chemicals Use slings only for their intended purpose 5. Importance of Compliance   Following OSHA standards prevents accidents, reduces equipment damage, and protects workers.Non-compliance can result in fines, project delays, and legal liability.